With the left-alignable AXC F XT ETH 1TX extension module, you can extend a PLCnext Control AXC F ... with an additional Ethernet interface.
AXC F XT ETH 1TX
-
PLC extension module
2403115
Left-alignable Ethernet interface, for connection to a compatible modular controller from the PLCnext Control range.
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 35 mm |
| Height | 126.1 mm |
| Depth | 54 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Note on application | |
| Note on application | Only for industrial use |
| Utilization restriction | |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Ethernet | |
| Bus system | RJ45 |
| Number of interfaces | 1 |
| Connection method | RJ45 jack |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission speed | 10/100/1000 Mbps (full duplex) |
| Transmission length | max. 100 m |
| Product type | I/O component |
| Product family | PLCnext Control Extension |
| Type | modular |
| Maximum power dissipation for nominal condition | 1.296 W |
| Potentials: Supply of the logic voltage UL | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 80 mA |
| typ. 54 mA (at UL = 24 V) | |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Transient protection; Suppressor diode | |
| Connection technology | |
| Connection name | Axioline F connector |
| Conductor connection | |
| Connection method | Push-in connection |
| Conductor cross-section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Axioline F connector | |
| Connection method | Push-in connection |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C (up to 2000 m above sea level) |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Permissible humidity (operation) | 5 % ... 95 % (according to DIN EN 61131-2) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| ATEX | |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | TÜV 19 ATEX 8356 X |
| IECEx | |
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx TUR 19.0031X |
| CCC / China-Ex | |
| Identification | Ex ec IIC T4 Gc |
| Certificate | , 2021122309114456 |
| UL Ex, USA / Canada | |
| Identification | Class I, Zone 2, AEx nA IIC T4 |
| Class I, Div. 2, Groups A, B, C, D | |
| Ex nA IIC Gc T4 | |
| Certificate | E366272 |
| UL, USA/Canada | |
| Identification | cULus |
| Certificate | E238705 |
| Corrosive gas test | |
| Identification | ISA S71.04.2013 G3 Harsh Group A, DIN EN 60068-2-60:2016-06 Method 4 |
| Mounting type | DIN rail mounting |
ABS
Approval ID: 20-1968571-PDALR
Approval ID: LR2480202TA-02RINA
Approval ID: ELE008423XG001cULus Listed
Approval ID: E238705CCC
Approval ID: 2021122309114456_CNcULus Listed
Approval ID: E366272
Your advantages
Left-alignable Gigabit-class Ethernet interface
Additional independent MAC address
PROFINET support
Electrical isolation between Ethernet interface and logic
Individual extension option for a PLCnext Control from the Axiocontrol series