PSR-ME40-4NO-2NC-24DC-SC-SET35 - Safety relays

1397653

Set of 35 safety relays as contact extension, dropout delay can be set from 0.5 s ... 30 s, 4 enabling current paths, 1 confirmation current path, together with basic device up to Cat. 3, PL d in accordance with EN ISO 13849, plug-in screw terminal block, width: 22.5 mm

Free download available. Downloads

Product details

Product description

Set consists of

Note on application
Note on application	Only for industrial use

Product type	Safety relays
Product family	PSRclassic
Application	Extension module
Control	1-channel
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Insulation characteristics
Overvoltage category	II, III (See the section “Insulation coordination”)
Degree of pollution	2
Times
Typical response time	typ. 40 ms (For U_sautostart)
Typical release time	50 ms (on demand via A1)
Delay time range	0.5 s ... 30 s ±40 %
Restart time	< 1 s (Boot time)
Recovery time	Delay time +500 ms

Maximum power dissipation for nominal condition	17 W (U_S = 26.4 V, I_L² = 72 A², P_Total max = 2.6 W + 14.4 W)
Nominal operating mode	100% operating factor
Rated insulation voltage	250 V
Rated surge voltage/insulation	See data sheet, section “Insulation coordination”.
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 %
Rated control supply current I_S	typ. 77 mA (at U_S)
Power consumption at U_S	typ. 1.85 W
Inrush current	< 2.5 A (typ. with U_S, Δt = 1 ms)
Filter time	5 ms (in the event of voltage dips at U_s)
Protective circuit	Reverse polarity protection; Suppressor diode

Digital: K1/K2
Description of the input	safety-related
Number of inputs	1
Input voltage range "0" signal	0 V DC ... 5 V DC
Input voltage range "1" signal	20.4 V ... 26.4 V
Input current range "0" signal	0 mA ... 2 mA
Filter time	1 ms (Test pulse width of low test pulses)
	1 s (Test pulse rate for low test pulse)
	No brightness test pulses / high test pulses permitted.
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	typ. 14 mA

Relay: Enabling current paths (27/28, 37/38, 47/48, 57/58)
Output description	2 N/O contacts each in series, safety-related, floating
Number of outputs	4
Contact switching type	4 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
	max. 250 V AC/DC
Switching power	min. 100 mW
Inrush current	min. 10 mA
	max. 6 A
Switching capacity	5 A (AC15)
	6 A (DC13)
Limiting continuous current	6 A (Observe derating and load limit curve)
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
	4 A gL/gG (for low-demand applications)
Relay: Confirmation current path (15/16)
Output description	Diagnostic contact, 2 NC in series, floating
Number of outputs	1
Contact switching type	2 N/C contacts in series
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
	max. 250 V AC/DC
Switching power	min. 100 mW
Inrush current	min. 10 mA
	max. 1 A
Switching capacity	1 A (AC15)
	1 A (DC13)
Limiting continuous current	1 A
Sq. Total current	1 A²
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	1 A gL/gG
Relay: Signaling current path (65/66)
Output description	2 N/C contacts parallel, non-safety-related, floating
Number of outputs	1
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
	max. 250 V AC/DC
Switching power	min. 100 mW
Inrush current	max. 1 A
Switching capacity	1 A (AC15)
	1 A (DC13)
Limiting continuous current	1 A
Sq. Total current	1 A²
Switching frequency	max. 0.5 Hz
Output fuse	1 A (gL/gG)

Connection technology
pluggable	yes
Conductor connection
Connection method	Screw connection
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 12
Stripping length	7 mm
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm

Status display	2 x LED (green)
Operating voltage display	1 x LED (green)

Width	22.5 mm
Height	112.2 mm
Depth	114.5 mm

Color (Housing)	traffic gray B (RAL 7043)
Housing material	PA

Safety data
Stop category (EN 60204-1)	1
Safety data: EN ISO 13849
Performance level (PL)	d
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	2
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	2
Safety data: EN IEC 62061
Safety Integrity Level (SIL)	2

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, amplitude 0.35 mm, 2 g

CE
Identification	CE-compliant

Mounting type	DIN rail mounting
Assembly note	See derating curve
Mounting position	vertical or horizontal

Commercial data

Item number	1397653
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DN01
Product key	DN1113
GTIN	4063151782443
Weight per piece (including packing)	6,210 g
Weight per piece (excluding packing)	5,815 g
Customs tariff number	85371098
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

Your advantages

Up to Cat. 3/PL d in accordance with ISO 13849-1, SIL 2 in accordance with EN IEC 62061, SIL 2 in accordance with EN IEC 61508

4 dropout-delayed enabling current paths, 1 signaling current path, and 1 confirmation current path

1-channel control

Reinforced insulation

ECLASS-13.0	27371819
ECLASS-15.0	27371819

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	34, 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	260c4965-2b3e-41a5-96ad-835333c9313d
EF3.1 Climate Change
CO2e kg	72.687 kg CO2e

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-ME40-4NO-2NC-24DC-SC-SET35 - Safety relays

1397653

Product details

ECLASS

ETIM

UNSPSC

cULus Listed

Functional Safety

Functional Safety

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-ME40-4NO-2NC-24DC-SC-SET35 - Safety relays 1397653

Product details

PSR-ME40-4NO-2NC-24DC-SC - Safety relays 1397654

ECLASS

ETIM

UNSPSC

Compatible products

CP-MSTB - Coding profile 1734634

CR-MSTB - Coding section 1734401

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-ME40-4NO-2NC-24DC-SC-SET35 - Safety relays

1397653